MWR Camshaft Set – Toyota 2ZZ-GE – Stage 2

$795.00

SKU: MWR-300912 Categories: , , Tags: , Brand:

Description

Specs: (Small cam lobe / Large cam lobe)

Int Lift (mm) Int Duration (Deg) Exh Lift (mm) Exh Duration (Deg)
Stock 2ZZ ?? /11.1 ?? / 300 ?? / 9.8 ?? / 268
MWR Stage 2 10.5 / 12.2 272 / 292 10.5 / 12.0 270 / 282
MWR Stage 3 10.5 / 12.4 276 / 298 10.5 / 12.1 272 / 286
Piper Stage 2 9.7 / 12.2 276 / 288 9.7 / 11.3 276 / 284
Piper Stage 3 9.7 / 12.4 276 / 304 9.7 / 11.7 276 / 296

What do these numbers mean? The 2zz starts out with fairly big cams. The aftermarket cams add lift and duration to increase performance from the midrange up. Ultimate power gains are pretty similar between MWR and Piper; the difference is in the small lobe, where Piper went pretty conservative for a good idle and MWR went bigger to maximize gains in the 2zz’s notoriously soft 4000-6000rpm midrange.

Installation is easy, taking only 2-3 hours for someone familiar with these engines. We recommend checking valve clearance but it usually does not require adjustment. Use the OEM recommended valve clearance and torque specs during install. Timing is simply set using the stock timing marks, no degreeing is needed.

If you are running a stock naturally aspirated engine and stock ECU (tune) you’re much better off with the stage 2 cams.

If you have a built engine, ported head, high compression, revving to 9k, etc, you’ll probably want to run stage 3 for maximum power.

Supercharged? Stage 3 tends to work best with no penalty in the midrange.

Turbo? We often stick with a stage 2 cam for turbo builds since there is less need for huge duration and you don’t generally need to rev as high.

**You MUST run upgraded aftermarket valve springs with *any* 2zz aftermarket cams to avoid coil bind. MWR springs are the best choice for those revving to 9000 or less. Ferrea dual valve springs work great to 9500+ but cause significantly faster valve and seat wear. You can optionally upgrade your retainers to titanium and while you’re at it, replace those problematic stock 2ZZ valves with MWR’s superior stainless steel valves or Ferrea stainless/inconel valves.

Important instructions – read this before install:
VVT TSB
Forum how-to thread

Additional information

Weight 14 lbs
Dimensions 24 × 5 × 4 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.