An MWR exclusive
Very low mile (under 50k) used 6-speed 4.3:1 transmission, specially adapted by MWR to bolt right in to Lotus Elise/Exige or Toyota Celica. Inspected for condition and function by MWR and includes 30-day warranty if bolted to unmodified naturally aspirated engine.
This is a very special transmission
It will bolt right up to any 1ZZ or 2ZZ engine and is specially modified by MWR so that it may be installed in any 05+ Lotus Elise, Exige or 2-eleven or 00+ Celica GT or GTS. No adapters, other parts or or custom work of any kind are required for the installation. Works with stock or aftermarket clutches, flywheels, shifters, shifter cables, axles.
Axle ratio is 4.312:1, so it is a very usable transmission for street driving or racing and it works best with forced induction. Revs are lower on the highway than they would be with a US market 4.5:1 Lotus/Celica transmission (~3400 rather than 4000 (Lotus) or 3600 (Celica) at 80mph) so fuel economy is noticeably better. Most people find that because of the Celica’s and especially the Lotus’s light weight there is little or no penalty in acceleration times with supercharged or turbocharged engines though it will slow down naturally aspirated cars a bit. There can actually be an acceleration advantage for forced induction cars because the lower gears are much more usable and less shifting is required.
Quality and strength
Built with 100% OEM parts so it is as strong as an OEM transmission. MWR recommends a maximum of 275whp for road course use and 350whp for street use though actual transmission durability will vary based on usage, vehicle weight, torque, clutch type and heat. If you will be exceeding those numbers you should definitely consider stronger solutions such as Jubu or Kaaz gear upgrades or MWR E153 swap for high power street or road course. Because of varying customer power levels and usages MWR guarantees only initial quality and function.
Final Drive: 4.312
US Lotus and Celica 6-spd Ratios:
6th: 0.815 Lotus (0.725 Celica)
Final Drive: 4.529
Celica GT / US Spyder 5-spd Ratios:
Final Drive: 4.312
If your car already has a 6-speed transmission, you may re-use the shifter shaft and save the cost of the assembled shaft. If you are converting from a 5-speed, you DO need the shifter shaft.