MWR Toyota Transmission – MR2 Spyder 6-spd 4.5:1 non-LSD – Used



Very low mile (under 50k) used 6-speed 4.5:1 transmission. Inspected for condition and function by MWR and includes 30-day warranty if bolted to unmodified naturally aspirated engine.

This transmission will bolt right up to any 1ZZ or 2ZZ engine in any manual transmission 2000-05 Toyota MR2 Spyder. No adapters, other parts or or custom work of any kind are required for the installation. Works with stock or aftermarket clutches, flywheels, shifters, shifter cables, axles. MWR MR2-S 6-speed shifter shaft and reverse blockout included and installed.

Axle ratio is 4.529:1 (same as stock Celica and Lotus), so it is the best choice for NA performance and for road racing applications where short, tightly spaced gearing is needed. You will see a performance and fuel economy improvement compared to the stock 5-speed.

MWR recommends a maximum of 275whp for road course use and 350whp for street use though actual transmission durability will vary based on usage, vehicle weight, torque, clutch type and heat. If you will be exceeding those numbers you should definitely consider stronger solutions such as Jubu or Kaaz gear upgrades or MWR E153 swap for high power street or road course.

1st: 3.166
2nd: 2.050
3rd: 1.481
4th: 1.166
5th: 0.916
6th: 0.725
Final Drive: 4.529

US MR2 Spyder 5-spd Ratios:
1st: 3.166
2nd: 1.904
3rd: 1.392
4th: 1.031
5th: 0.815
Final Drive: 4.312

This transmission includes an open differential but MWR is happy to install your choice of limited slip differentials (LSD). Just select that option below which covers the installation labor and installation kit, then purchase separately your choice of LSD and we’ll get it installed for you.

Additional information

Weight 110 lbs
Dimensions 18 × 18 × 18 in