MWR Underdrive Pulley – Lotus/Toyota 2ZZ Water Pump

(9 customer reviews)

$79.00

Description

***In stock now!***

This pulley fits 2ZZ engine, and can also be used on a 1ZZ engine by installing 2ZZ WATER PUMP

We recommend installing new PULLEY BOLTS (sold separately)

Free up the horsepower you’re wasting!

MWR’s lightweight aluminum water pump pulley drives your water pump 6% slower than stock to minimize parasitic loss and improve acceleration. By spinning the water pump more slowly you also decrease cavitation at high RPM and improve cooling.

All MWR pulleys are made of lightweight 6061 aluminum with a hard anodized coating. This results is an ultra light part with the same surface hardness as hardened steel. Weight is 247g compared with 325g for the stock pulley.

Lighter weight. More power. Better cooling.

Includes water pump pulley only. Underdrive alternator pulley available separately. Longer belt required – just add 2″ to your stock belt length if upgrading alternator and water pump pulleys.

Find belt information here

BELT SELECTION GUIDE – TOYOTA MODELS

BELT SELECTION GUIDE – LOTUS MODELS

Independent dyno test performed for a customer (dyno shop not affiliated with MWR):

MWR-506005-02-mwrMWRudpulleydyno

Additional information

Weight .9 lbs
Dimensions 5 × 3 × 3 in

9 reviews for MWR Underdrive Pulley – Lotus/Toyota 2ZZ Water Pump

  1. Alex Thomas –

    Helps the most in 6th gear while going up hills but still worth it very happy.

  2. hani mohamad (verified owner) –

    just arrived at my door step looks great its abit bigger than the orginal but doesnt mater im happy with it 🙂

  3. John Bourdeau (verified owner) –

    Looks awesome!, do notice a difference at certain rpm ranges with pulley, if you have a 1Z with UD Crank Pulley the belt totally hits the timing cover where the timing marks are, better just to use OEM with the MWR WP Pulley. Thanks again MWR!

  4. CRAIG PEDERSEN (verified owner) –

    JUST CHANGED OUT BOTH PULLEYS YESTERDAYON MY 2005 XRS, I CAN DEFINITELY FEEL THE DIFFERENCE IN IN THE 4-5000RPM RANGE AND IT GOT RID OFF DEAD SPOT STARTING OUT IN 1ST GEAR. GREAT PRODOCT

  5. CRAIG PEDERSEN (verified owner) –

    JUST CHANGED OUT BOTH PULLEYS YESTERDAY ON MY 2005 XRS, I CAN DEFINITELY FEEL THE DIFFERENCE IN IN THE 4-5000RPM RANGE AND IT GOT RID OFF DEAD SPOT STARTING OUT IN 1ST GEAR. GREAT PRODUCT

  6. nchandler14 (verified owner) –

    Just installed the MWR alternator and waterpump underdrive pulleys on a previously stock 1zz. The power increase is noticeable. If you drive manual, the car will feel less likely to lug and you can sit in lower gears more often. It’s a good feeling for someone who is a little tired of the cars power band. Had to buy a 2zz water pump and a 765k6 belt.

  7. Jacob Norman (verified owner) –

    I did an overhaul on my 1ZZ 2006 Corolla and replaced the water pump and alternator with the parts used on the Celica GTS. The MWR pulleys are a great upgrade to go along with the new pump and alternator. I noticed it ran smoother at low RPMs when driving in first gear or reverse. It feels the same when driving around town or on the freeway, but I notice better acceleration at high RPMs. Very nice upgrade for any 1ZZ or 2ZZ engine.

  8. Trimz (verified owner) –

    Installed on a 05 1ZZ Corolla, MWR alternator pulley with the MWR underdrive water pump pulley, 2ZZ QRP water pump with the uneven flange bolts, Gates belt – K060764 (use belt selection guide), and TRD thermostat. I think it’s worth it, you can feel the difference in the low RPM range, the car pulls more easily as if you were pressing the gas harder with the stock pulleys. A little difficult to notice when the car is at high RPM, but I’m sure there is a difference.

    When installed it looks like the belt will not fit between the belt tensioner pulley and the bigger water pump pulley, but it will fit. According to what belt suits your needs from the belt selection guide, just install the belt. It may be difficult even though it’s longer than stock size belt, it will still feel really tight to put on. The belt will create a force that will pull the belt tensioner pulley away from the water pump pulley so they aren’t touching anymore. I needed help from others to install.

    The car feels more playful now, and it suits my heel-toe downshift driving much better since RPMs seems to go up faster. I would sit in 5th gear and think I would be in 4th gear, then try to shift, just to realize I am in 5th gear. I feel if paired with a lightweight flywheel, the effect of the RPM going up faster will double, but then having to give more gas from a stop because that’s the effect of a lightweight flywheel.

    Looking forward to have these installed on my Celica GT with: lightweight Fidanza flywheel, stage 1 Crower cams (stock tune ok, no valve upgrades needed unless going pass 7K RPM) , LUK street performance clutch, and cold air intake. And on my Celica GTS with: MWR Billet oil pump gear set, QRP 2ZZ oil pan with 1ZZ-style baffle, and cold air intake.

  9. racer.a.stone (verified owner) –

    I installed alt and water pump pulleys on my 2008 Corolla S and I paired it with a vms racing lightweight crank pulley and these upgrades are a night and day difference, especially when you also pair a Injen cold air intake, the mwr pulleys and crank pulley really do make a noticeable difference in power mostly low end and top end power and it made a huge possitive impact on the power curve, I have an automatic Corolla so I’m sure the impact will be a lot more noticeable with a manual

    I also got the longer gates belt and getting the belt aligned and put on is a 2 person job, be careful not to round off the tensioner bolt when getting the belt on and off because it extremely easy to round off, I rounded mine off and had to get a wood dowel rod and put it under the piston of the tensioner and jack it up so I could get the belt on, also it will look like the tensioner and the water pump pulley won’t clear each other, they will clear each other as the belt goes on.

    I would 100% recommend these pulley upgrades to someone wanting to get more power out a 1zz, I have these pulleys along with an Injen cai, 1zz maf mod and 2zz injectors and magnaflow catback and ppe header and test pipe and these pulleys were probably my favorite mod because of the price to impact it made.

Only logged in customers who have purchased this product may leave a review.